Klotz Communications secures first European project for DC3 consoles!
Munich, February 2017: Klotz Communications has won the first project for DC3 consoles in Europe.
The DC3 consoles go into the main facility of the RMF Group in Krakow and are supplied through Klotz Communications’ distributor Studiotech Poland.
RMF was the first commercial radio station in Poland, which started in the early 90’s. The RMF Group is part of Bauer Media, and RMF FM is their flagship program providing national coverage for listeners from 25-39 years of age. The project is the first phase for RMF to renew their overall system. That includes the upgrade of the Klotz VADIS equipment in the MCR and Newsroom with the new VADIS G2 network, and new DC3 consoles for the main two on air studios of RMF FM. The new MCR and DC3 consoles will be based on a TCP/IP network topology and the company is using the DX20 IPX/SPX to TCP/IP converters to integrate the older VADIS components and Decennium consoles of their other two programs. The new studios will be equipped with a 20-fader DC3 each.
The monitor module of the DC3 consoles is equipped with Touch’n’Tactile technology which combines traditional fader modules with a HTML based monitor section that will be programmed to the exact needs of RMF FM. The consoles feature a complex global N-1 matrix which offers up to 64 mono-equivalent N-1 clean feed busses per console. RMF trusts the low latency technology which the Klotz VADIS G2 network offers.With the DC3 consoles and the new DX interface devices, Klotz Communications has a complete suite of products, which are backwards compatible with VADIS systems, and allow a seamless and gradual upgrade of existing systems without the need for large capital expenditure. The DC3 control surface allows an in-situ replacement of older DC2 surfaces, and the DX interfaces take care of the upgrade from IPX/SPX networks to the TCP/IP protocol. The new VADIS G2 engine and its interface cards are compatible with older generation VADIS technology.
Klotz Communications celebrates 75th Graphite Two console sale
Munich, September 2016: Klotz Communications today announced the sale of its 75th Graphite Two console to a new broadcaster in Myanmar.
The Monnect Group in partnership with Shwe Than Lwin Media is building Myanmar’s latest broadcasting station including a main on-air studio, back-up studio, production studio, and main control room. The sale is through Klotz Communications’ Thai distributor Digitra Co. Ltd which is the appointed system integrator for the overall installation.
The sale of the 75th Graphite Two console also marks the 225th console sold by Klotz since its relaunch.
“We are very happy with the success we have seen from the Graphite Two console. It’s a very popular mixer and we’ve shipped these consoles to places all over the world. It’s a very affordable product and offers features that are often only found in consoles with a much higher price tag,” commented Thomas Klotz, President of Klotz Communications.
The Graphite Two is a digital networking console which can be used in on air and production environments alike. The console’s intuitive configuration GUI provide the end-user with a high degree of flexibility and matches the requirements of modern broadcasters perfectly.
The console comes in sizes from 4 to 32 faders and its modular I/O structure allows the expansion of the console at any stage. Its powerful DSP bank provides built-in audio processing on every channel, and all I/O modules and DSP cards are hot swappable. Multiple consoles can be networked using Madi, Fibre, or AoIP protocols.Klotz Communications believes firmly in the Smart Radio trend and the latest product launches confirm this direction of the company. The ability to utilise information from multiple platforms and to combine this information rapidly and economically is a challenge that producers face today. Klotz Communications consoles address these requirements and its product range provide innovative solutions to connect events and teams, control a stations workflow, and delivering the tools needed to create entertaining, engaging, and authentic programs.
Studiotech Poland is the new partner for Poland
Munich, August 2016
Klotz Communications today announced the appointment of Studiotech Poland as its new partner for the Polish market. The appointment is with immediate effect and Studiotech will be responsible for all sales and support activities for Klotz Communications’ complete product range.
“We are happy to appoint Studiotech Poland to represent Klotz Communications in Poland. The company has a great reputation and more than 20 years of experience in the distribution/sales, installation and after-sales servicing of professional audio and video equipment. Their focus on first class service and customer satisfaction as well as a well-trained staff with great product knowledge, quality standards and attention to detail and customer care assure us to have found the perfect partner for the Polish market. We’re looking forward to a promising collaboration with Studiotech Poland in the future.” explained Thomas Klotz, President of Klotz Communications.
With the recent launch of the DC 3 console and the new DX interface devices, Klotz Communications has a complete suite of products, which are backwards compatible with VADIS systems, and allow a seamless and gradual upgrade of existing systems without the need for large capital expenditure. The DC 3 control surface allows an in-situ replacement of older DC 2 surfaces, and the DX interfaces take care of the upgrade from IPX/SPX networks to the TCP/IP protocol. The new VADIS G2 engine and its interface cards are compatible with older generation VADIS technology.“We are pleased to be announced as the new partner of Klotz Communications for Poland. For us the company with its long-standing experience in the design of professional audio systems, especially for the Broadcast market, is the ideal partner and we are sure that this collaboration will result in a fruitful future for us, Klotz Communications and our customers”, said Jerzy Listwan, Key Account Manager of Studiotech Poland.
Pacific Live Media for Australia and NZ markets appointed
Munich, July 2016
Klotz Communications is proud to announce the appointment of Pacific Live Media as its new partner for Australia, New Zealand, and the Pacific Islands. The appointment is with immediate effect.
Pacific Live Media will be responsible for all sales and support activities for Klotz Communications’ complete product range including the recently launched DC 3 console, and the award winning Touchstone® controller.
“We are excited about the appointment of Pacific Live Media and look forward to working with Chris and his team. Chris has been in the radio space in Australia for nearly two decades and is very familiar with the market place and our technology. We’ve launched a series of products over the last 18 months which allow our customers to upgrade their VADIS system to the next generation of hardware and software. With his technical expertise and his knowledge of the radio industry Chris is the perfect choice to guide users through this transition”, commented Andre Sauer, General Manager and Partner of Klotz Communications.
With the recent launch of the DC 3 console and the new DX interface devices, Klotz Communications has a complete suite of products, which are backwards compatible with VADIS systems, and allow a seamless and gradual upgrade of existing systems without the need for large capital expenditure. The DC 3 control surface allows an in-situ replacement of older DC 2 surfaces, and the DX interfaces take care of the upgrade from IPX/SPX networks to the TCP/IP protocol. The new VADIS G2 engine and its interface cards are compatible with older generation VADIS technology.“Klotz product has always been synonymous with quality and reliability, the large installation base and reliability over that period is a testament to their product integrity. It is an honour to be working with them in the region, and we look forward to engaging with the Radio industry as Klotz partner”, commented Chris Dredge, Managing Director of Pacific Live Media.
Singapore, February 2016
Klotz Communications is proud to announce the appointment of Setron India Private Limited as its sole dealer for the Broadcast market in India. The appointment is with immediate effect.
Setron India is a pioneer in the digital audio and video technology in India, and provides end to end solutions for the video and audio industry. Its systems solutions are widely applied and found in the broadcasting industries. Setron India will take over the sales and support functions for the Klotz Communications network product range in the broadcasting market.
“We have looked for a suitable partner for the India market for some time and have found in Setron India a company with profound knowledge of the broadcast market. The skill sets that Setron India brings to the partnership compliment our products perfectly,” said Henry Cheong, Director, Klotz Communications Asia.
With the Integra, DC3 console and the Touchstone controller Klotz Communications has launched a series of new products for the broadcast market, which address the rapid change of the industry. These products in conjunction with Klotz Communications sophisticated hardware provide new workflow efficiencies, enabling our customers to benefit from lower installation and operating costs.
“Klotz Communications has a strong orientation towards innovation, technical expertise, and customer focus that form the basis of its high technological standards and excellent reputation. Setron core values align well with those of Klotz Communications and we are excited about this relationship and the opportunities this brings for both companies in India,” commented Naresh Dhawan, Managing Director of Setron India.
Munich, December 2015
Klotz Communications today announced it has purchased the assets of the former Qphonics from the company’s insolvency lawyers.
Buying back the assets of Qphonics (former Klotz Digital) closes the loop on what Klotz Communications set out to achieve, which is to help existing users of the VADIS platform to extend the product’s lifecycle and the investment they made in Klotz Digital, and at the same time provide a safe upgrade path to the next generation of products and technology.
Klotz Communications is now the sole owner of all intellectual property, including hardware and software, and controls all licensing, maintenance and upgrades for the VADIS platform worldwide.The buy-back also gives the company access to a warehouse of spare parts, console surface modules, and critical elements such as PSUs and controller modules for Vadis frames of various generations.
“Over the last 12 months we have contacted many of the long-term Vadis users and found that most systems are still in use 14+ years after they were installed, despite the corporate changes at Klotz Digital/Qphonics, and the lack of support that resulted from those changes. In conversations with end-users we learned that the hardware was rock solid and hadn’t failed on them over all these years. What we also learned was that users were hesitant to change their system as research showed that other systems couldn’t replicate the flexibility and adaptability to a stations workflow like a VADIS system can, so there was a real pull for Klotz Communications to buy back what was lost under unfortunate circumstances 5 years ago”, Thomas Klotz commented.
Klotz communications was founded in January 2015 by Thomas Klotz and Andre Sauer to address the broadcast market with a new range of products and innovative developments such as the Touchstone® technology. The company quickly established regional support offices in China, Singapore, Germany, and the USA to be closer to the market and support the existing systems. Klotz Communications offers a complete suite of consoles and routers to serve the Radio industry, from small stand-alone consoles to large, complex broadcast centres.
Highlights of the year for the company were the launch of its Touchstone® controller and the awards the product won at NAB; the release of its Broadcast Productivity Suite of software applications specifically targeted at the radio market at the IBC conference, and now the acquisition of the assets and IP of Qphonics/Klotz Digital.
After a very successful first year, the company has already outgrown its offices and is taking the year-end break as an opportunity to move to a bigger facility. The team is looking forward to an exciting 2016 with the pending launch of its new DC3 console surface, that broadcasters and users of the VADIS technology are eagerly awaiting.
Users of the VADIS platform, including DC2, AEON, and XENON consoles, are encouraged to contact Klotz Communications at to discuss immediate service and support requirements.
Radio Luoyang on air with Klotz Communications
Munich, October 2015
Klotz Communications today announced the sale of five of its Graphite Two on-air consoles to Radio Luoyang in China. The five consoles are all 16-fader models and are used in the main on-air studios in Radio Luoyang’s new broadcast center, which is scheduled for completion by the end of the year.
The consoles are sold via Klotz Communications’ system integrator Evertop Technology (Int’l) Ltd., Hong Kong.
"Radio Luoyang has been a user of Klotz on-air consoles for over 10 years and has always liked the stability of the products and the rich feature sets offered by Klotz's consoles. After detailed comparisons with other products on the market Radio Luoyang opted for the Graphite Two console as its main on-air mixer for the console’s layout, features, and especially the newly developed setup GUI", commented Andre Sauer, Klotz Communications General Manager.
The consoles are integrated into the overall broadcast system using the common MADI protocol and also via Klotz Communications new Audio over IP interface based on the Dante® protocol.
Klotz Communications appoints JAA Systems for Malaysia
Kuala Lumpur, October 2015
Klotz Communications today announced the appointment of JAA Systems Sdn Bhd as its exclusive distributor for its broadcast product range for Malaysia.
JAA Systems will be responsible for all sales and support activities for Klotz Communications radio mixers and digital audio routers including graphite one, graphite two, integra, and touchstone consoles, as well as the new g2 audio platform. The g2 audio platform provides AoIP connectivity and is compatible with VADIS products by Klotz Digital.
“We are thrilled to be appointed as the exclusive distributor for Klotz Communications in Malaysia. It is a great honour to us. The Klotz brand has been established in Malaysia for decades and most, if not all, Klotz equipment is still working fine since it was first installed, with some installations dating back more than 15 years! We will bring back the strong Klotz brand again and take it to the next level!” said David Chan, General Manager of JAA Systems Sdn Bhd.
“We are happy to appoint JAA Systems and David Chan to represent Klotz Communications in Malaysia. David has previously worked with Klotz Digital Asia and has established his name in the broadcast industry in Malaysia. He is the right choice to support the Klotz brand in Malaysia and we trust him and his team to do the best possible job for our customers!” explained Thomas Klotz, President and Managing Director of Klotz Communications.
VADIS users and former clients of Klotz Digital can contact our regional support offices via email to for more information.
Klotz Communications appoints new partner for the China market
Klotz Communications together with Klotz Systems Ltd, China, are proud to announce the appointment of Hangzhou Linker Digital Technology Co. Ltd as its exclusive Value Added Reseller for the Broadcast market in China. The appointment is with immediate effect.
Hangzhou Linker Digital Technology Co. Ltd is a pioneer in the development and design of digital audio and video technology in China, and its systems solutions are widely applied and found in the broadcasting, telecommunications, and public address industries. Linker will take over all sales and support functions for the Klotz Communications network product range in the broadcasting market.
“We have looked for a suitable partner for the China market for some time and have found in Linker a company with profound knowledge of the broadcast market. The skillsets that Linker brings to the partnership compliment our products perfectly,” said Andre Sauer, Head of Sales and Marketing for Klotz Communications.
With the Integra console and the Touchstone controller Klotz Communications has launched a series of new products for the broadcast market, which address the rapid change of the industry. These products in conjunction with Klotz Communications’ sophisticated hardware provide new workflow efficiencies, enabling our customers to benefit from lower installation and operating costs.
“Klotz Communications has a strong orientation towards innovation, technical expertise, and customer focus that form the basis of itshigh technological standards and excellent reputation. Linker’s core values align well with those of Klotz Communications and we are excited about this relationship and the opportunities this brings for both companies in China,” commented Zhao Fan, CEO of Hangzhou Linker Digital Technology Co Ltd.
Klotz Communications opens Sales and Support office in Singapore
In May 2015 Klotz Communications GmbH has opened a regional sales and support office based in Singapore. Klotz Communications Asia will look after all sales and support functions for South Asia and South East Asia, and stocks spare parts for immediate delivery.
The opening of Klotz Communications Asia comes only a few months after the opening of its European sales office and is a result of the increased demand that the company is seeing for its new line of products.
Klotz Upgrade and Support program available
Klotz Communications announced today an upgrade and support program for users of the VADIS platform and VADIS control surfaces (DCII, Decennium) including an upgrade kit from IPX/SPX to TCP/IP control protocols. In addition the company offers additional interface cards for its g2 audio engine including new fibre optics cards, self-syncing MADI cards, and AOIP Dante interface cards.
Customers can register for the upgrade kits via an online registration link at
Andre Sauer joins Thomas Klotz as a shareholder and operating partner
Andre’s involvement in the broadcasting industry spans over 17 years. After he started his career at an Australian equipment manufacturer he joined Klotz Digital in 2000 to head up the Asia Pacific operations in Kuala Lumpur, Malaysia. He quickly put his stamp on the organisation and opened an office in Australia to cater for the huge demand the company received from Australian broadcasters. It was under his leadership that the company enjoyed its stellar growth in the region and became a household name when it came to digital consoles and audio networking solutions for radio broadcasters.
In 2007 Andre left Klotz Digital and Malaysia to return to Perth with his family where his three boys started their schooling. Andre remained in a consultative role to Thomas Klotz over the ensuing years and followed the developments in the broadcast market.
In 2014 Thomas and Andre decided to start the new company, Klotz Communications, to support the thousands of installations of Klotz Digital products the world over, and to develop the next generation of audio products to address the development in the audio and broadcasting industries.